2 Hour Cure Clear Polyaspartic Coating

General Details

2 Hour Fast Cure 67% Solids Clear Polyaspartic Coating DuraKote PFC-120

SureCrete’s Dura-Kote PFC-120 is a specially formulated 67% solids hybrid solvent based polyaspartic coating designed for application over interior concrete, cement based overlays, or as a top finish coat on epoxy systems. Dura-Kote PFC-120 provides a low VOC (330 g/L), UV stable, penetrating, film forming, color enhancing, and high gloss wear surface. The high performance clear top coat generates the premier balance of strength, flexibility, chemical and scratch resistance. As a vertical wall coating, it enhances anti-graffiti properties. Dura-Kote PFC-120’s rapid cure time eliminates excessive waiting to return a floor to service. Unlike many polyaspartics, it has a user-friendly pot life of approximately 20 – 30 minutes. Turnaround time for a floor may be as little as 5 – 6 hours. It is ideally suited for both commercial and residential settings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

Surecrete Dura-Kote PFC-120 Specs
Coverage – Approximately 300-400 square feet per gallon, per coat (varies widely based on substrate porosity and application methods)
VOC Rating – less than 330 g/L
Solids Content – 67%
Pot Life – approximately 30 minutes
Shelf Life – 1 year in original unopened container
Ready for re-coat – 1-2 hours (4-5 hours at low temperatures)
Light Duty Use – 3-4 hours (24-36 hours at low temperatures)
Heavy Traffic Ready – 24-36 hours (3-4 days at low temperatures)
Full Cure – 1-2 days (Up to 7 days at low temperatures)
Appearance (cured) – Clear Gloss
Appearance (wet) – Clear
Water Resistance – Excellent, beads water
Mechanical Stability – Excellent
Light Stability – Excellent
Odor – Aromatic
Application Temperature – 32 – 90 degrees Fahrenheit
Gardener direct / Reverse impact – More than 160 inch pounds
Taber Abrasion – 40-60 mg loss
QUV – A – less than 5.0 at 2,000 hours
Gloss Retention – More than 95% at 2,000 hours
Get Best Price

Get Best Price PFC-120

Your Name:*
E-mail:*
Phone:
-
Your Role:*
Subject:*
Message/Question:
Get Best Price Now
Here