Clear Stamped Concrete Sealer

General Details

Acrylic Stamped Concrete Sealer Low VOC SureSeal HS 340

SureCrete’s HS 340 is a premium, high performance, single-component, 30% acrylic solids, low VOC (400 g/l), sealer designed for SureCrete overlays or other cement-based products like a clear stamped concrete sealer. As with most acrylics it is vapor permeable and readily applies outside. However, HS 340 is specially formulated for extreme climates where a low VOC sealer is required. Its nano-sealer technology deeply penetrates and reacts internally with cement, slowing moisture migration and efflorescence and intensifying bond capacity. Even in warmer climates HS 340’s slower evaporating solvents will not show a cotton candy effect before the applicator can finish a tight, smooth surface. A single coat application will provide a UV shield, enhance the beauty, and protect the surface of driveways, garage floors, patios, walkways, pool decks, and stucco.

Surecrete SureSeal CS 125L Specs
Coverage – Approximately 200-240 square feet per gallon, per coat (varies widely based on substrate porosity and application methods)
VOC Rating – less than 400 g/L
Solids Content – 30%
Shelf Life – 2 years in original unopened container
Ready for re-coat – 24 hours
Light Duty Use – 24 hours
Heavy Traffic Ready – 72 hours
Appearance (cured) – Clear Gloss
Appearance (wet) – Clear
Water Resistance – Excellent, beads water
Mechanical Stability – Excellent
Light Stability – Excellent
Diluent – Hydrocarbons
Odor – Solvent
Application Temperature – 50 – 90 degrees Fahrenheit
Get Best Price

Get Best Price HS-340

Your Name:*
E-mail:*
Phone:
-
Your Role:*
Subject:*
Message/Question: