Epoxy 100% Floor Coating

General Details

Clear Thick Build Concrete Sealer DuraKote Epoxy 100

Dura-Kote Epoxy 100 is a 2 component 100% solids, zero VOC floor coating system that is used in a wide variety of applications such as, high build clear coat for a host of decorative concrete systems, primer coat and binder coat for Dura-Kote Flakes and Metallics. Yellowing and blush are minimized by the use of an aliphatic amine curing agent for part B, providing a premium, durable clear coating for colored or stained concrete and cement based overlays. For unique, job specific conditions, 2 other specialized part B’s are available, Premium UV and Premium CW. See your SureCrete distributor for details. The high performance, self-leveling characteristics generate the premier balance of strength, flexibility, and chemical resistance that is both user-friendly and extremely durable. Dura-Kote Epoxy 100 is ideally suited for any commercial or residential setting: manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, gyms, locker rooms, stadiums, or anywhere that an exceedingly resilient floor is desired.

Surecrete DuraKote Epoxy 100 Specs
Coverage – 100-150 square feet per gallon per coat catalyzed product (varies widely based on application method)
VOC Rating – 0 g/L Solids Content – 100%
Shelf Life – 1 year in original unopened container
Mixing Ratio – 2 parts A to 1 part B Pot Life – 10-20 minutes
Ready for recoat – 6-8 hours (18+ hours at low temperatures)
Light Duty Use – Approximately 16 hours (Up to 30 hours at low temperatures)
Heavy Traffic Ready – Approximately 24 hours (Up to 3 days at low temperatures)
Full Cure – 5-7 days (Up to 14 days at low temperatures)
Appearance (cured) – High gloss sheen
Appearance (wet) – Clear – Straw
Color Water Resistance – Excellent, beads water
Mechanical Stability – Excellent
Light Stability – Yellows Odor – Sweet
Adhesion – 400 PSI (concrete failure)
Abrasion Resistance (Tabor) – 1,000 gm. load @ 500 cycles = 31 mg loss
Compressive Strength – 9,000 PSI
Application Temperature – 50 – 90 degrees Fahrenheit
Get Best Price

Get Best Price DuraKote Epoxy 100

Your Name:*
E-mail:*
Phone:
-
Your Role:*
Subject:*
Message/Question: